| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 |
| 物理性能 | | --- | | | |
| 吸湿率(平衡) | (23 C/50%RH)1L | ISO 15512 | 0.2 | % |
| 含湿量（） | 23℃ | ISO 62 | 0.6 | % |
| 粘度 | MV,260 C,1500 1/sec | DIN 54811 | 311000 | cP |
| 模塑收缩量 | Flow | ASTM D 955 | 0.005-0.007 | cm/cm |
| 熔体流动速率 | cm3/10min,melt volume rate,MVR at 260C/5.0 kg | ISO 1133 | 16 | g/10min |
| 机械性能 | | --- | | | |
| 抗拉强度 | Ultimate | | Yield | | Ultimate | | Yield |
| | 5 mm/min | | 50 mm/min | | 5 mm/min | | 50 mm/min |
| | ISO 527 | | ISO 527 | | ISO 527 | | ISO 527 |
| | |
| | 50 mm/min | | 5 mm/min | | 5 mm/min | | 50 mm/min |
| | ISO 527 | | ISO 527 | | ISO 527 | | ISO 527 |
| | |
| 拉伸模量 | 1mm/min | ISO 527 | 2.6 | GPa |
| 挠曲模量 | 2mm/min | ISO 178 | 2.5 | GPa |
| 屈服挠曲强度 | 2mm/min | ISO 178 | 85 | MPa |
| | 80*10*4+23C | | 80*10*4+23C | | 80*10*4-30C | | 80*10*4-30C |
| | ISO 178/1A | | ISO 178/1U | | ISO 178/1U | | ISO 178/1A |
| | |
| | at-30C,V-notch Edgew 80*10*4 sp=62 | | 23C,V-notch Edgew 80*10*4 sp=62 |
| | | |
| 泰伯磨耗值 | CS-17,1kg | GE Test | 62 | --- |
| 电气性能 | 体积电阻率 | --- | IEC 60093 | Min 1e+015 | Ohm-cm |
| 表面电阻率 | ROA | IEC 60093 | Min 1e+015 | Ohm |
| --- | | | --- |
| 介电强度 | in oil,3.2mm | | in oil,1.6mm | | in oil,0.8mm |
| --- | | IEC 60243-1 | | IEC 60243-1 | | IEC 60243-1 |
| | |
| --- | | | --- |
| 电弧电阻 | Tungsten | ASTM D 495 | 5 | sec |
| 比较性漏电指数 | --- | IEC 60112/3rd | 250 | V |
| 热 性 能 | 导热率 | --- | ISO 8302 | 0.2 | W/m-K |
| 热畸变温度 | at 0.46MPa(66psi) | | at 1.8MPa(264psi) |
| | HDT/Be,0.45MPa Edgew 120*10*4 sp=100mm | | HDT/Ae,1.82MPa Edgew 120*10*4 sp=100mm |
| | | |
| --- | | | |
| --- | | | |
| --- | | | --- |
| 可燃性测试 | mm,IEC Needle Flame Test,10s,passes at | IEC 60695-2-2 | 1.6 | --- |
| 含氧指数 | --- | ISO 4589 | 32 | % |
| 灼热丝试验 | passes at 1mm | IEC 60695-2-1 | 960 | ℃ |
| 其它性能 | 球体压力测试 | 125C+/-2C | IEC 60035-1 | passes | --- |
